Scrap Charging Overhead Crane

Overview:

For loading cranes, depending on the structure and requirements of the material opening, a double independent trolley type or a single trolley type is usually used as the lifting mechanism. In the case of a three-ear bearing type material opening, the loading crane usually designs the hook near the material opening as a double lifting point hook. This means that there are two hanging points on the hook, which can provide more stable lifting and balance; while the hook far away from the material opening is usually designed as a single hook, that is, there is only one hanging point. This is because hooks far away from the material opening generally do not require precise positioning and balancing, so the single-hook design is simpler and more economical.

Features:

Specification:

NAME		Ladle Crane
Crane Capacity		60/20T
Test Load Ratio		1.25
Crane Span		22.00m
Lifting Height		16/16m
Work Duty		M7
Main Hoisting System	Lifting speed	7m/min
	Motor Power(KW)	90(60%)
	Wire Rope Falls	2x6
Aux. Hoisting System	Lifting speed	10m/min
	Motor Power(KW)	48(60%)
	Wire Rope Falls	8
Cross Traveling Mechanism	Traveling Speed	30m/min
	Motor Power	13kw(60%)
	Wheel Load	277KN
Long Traveling Mechanism	Traveling Speed	60m/min
	Motor Power(kw)	2x19kw (60%)
	Max. Wheel Load	305KN
Control Method		Cabin Control
Total crane Power(kW)		189kw
Protection Level of Motor		IP54

Packing

Certification